MCP-80V-93F-Modules

MCP-80V-pitch control
Models
MCP0093C0-0080R0SHZ
Application
wind turbine
Industrial
Heavy duty machinery
Energy storage system

The 80V93F module is a complete energy storage module comprised of 32 series connected individual super capacitor singles, of which nominal capacitance is 3000F. The module includes cell balance voltage management circuitry which can protect each cell from operating in a damaging overvoltage condition. The module has the function of polling (each cell voltage output), and the caution of over voltage or overheating, are mainly used in pitch control of wind turbine、industrial、micro grid power storage,ect.
The module is fixed by 4 positioning holes in the middle, and output by screw holes on surface.To avoid arcing and sparking the energy storage module should be in a discharged state and the system power disconnected during installation. Temperature signal is to achieved through PT100, which is in the middle of the module. The resistance is changed with the temperature.
The positive terminal is threaded for M8 x 1.25 steel bolts. The negative terminal is threaded for M10 x 1.5 steel bolts. Maximum thread depth is 20 mm. Spring washer are required to ensure long term, reliable connections. The wire should be used in a suitable length, and pay attention to the polarity of the module according to the sign. The module should be mounted with the bottom side down, and fixed with screw bolts through the 4 holes of the module. It is recommended to a long screw of appropriate length.

Related Post