Normative reference about 62391-1 © IEC:2006(E)

Note: 62391-1 © IEC:2006(E) is a document regarding fixed electric double-layer capacitors (edlc  capacitor) for use in electronic equipment. This document is applicable for electrolytic capacitor/electrical capacitor /esr capacitor/ farad capacitor /start capacitor, and so on.

The following referenced documents about 62391-1 © IEC:2006(E) are indispensable for the application of this document. For data references ,only the edition cited applies. For undated references ,the lastest edition of the referenced document (including any amendments)applies.

IEC 60027 (all parts ), Letter symbols to be used in electrical technology

IEC 60050(all parts),International Electrotechnical Vocabulary(IEV)

IEC 60062, Marking coeds for resistors and capacitors

IEC 60063,Preferred number series for resistors and capacitors

IEC 60068-1:1998 Environmental testing-Part 1: General and guidance Amendment 1(1992)

IEC 60068-2-1:1990,Environmental testing-Part 2:Tests-Tests A:cold Amendment 1(1993)

Amendment 2(1994)

IEC 60068-2-2:1974,Environmental testing-Part 2:Tests-Tests B:Dry Heat Amendment 1(1993)

Amendment 2(1994)

IEC 60068-2-6:1995, Environmental testing-Part 2:Tests-Test Fc:Vibration(sinusoidal)

IEC 60068-2-14:1984, Environmental testing-Part 2:Tests-Test N: Change of temperature Amendment 1(1986)

IEC 60068-2-20:1979, Environmental testing-Part 2:Tests-Test T:Soldering Amendment 2 (1987)

IEC 60068-2-21:1999, Environmental testing-Part 2-21:Tests-Test U: Robustness of terminations and integral mounting devices

IEC 60068-2-45:1980, Environmental testing-Part 2:Tests-Test XA and guidance: Immersion in cleaning solvents

Amendment 1(1993)

IEC 60068-2-47:1999, Environmental testing-Part 2-47:Test methods-Mounting of components, equipment and other articles for vibration, impact and similar dynamic tests

IEC 60068-2-58:2004, Environmental testing-Part 2-58:Tests – Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices(SMD)

IEC 60068-2-78:2001, Environmental testing-Part 2-78:Tests – Test Cab: Damp heat,steady state.

IEC 60294:1969, Measurement of the dimensions of a cylindrical component having two axial terminations

IEC 60617(all parts)[DB],Graphical symbols for diagrams

IEC 60695-11-5: Fire hazard testing-Part 11-5: Test flames-Needle-flame test method: Apparatus confirmatory test arrangement and guidance

IEC 60717:1981, Method for the determination of the spcae required by capacitors and resistors with unidirectional terminations

IEC 61760-1:1998, Surface mounting technology –Part 1:Standard method for the specification of surface mounting components(SMDs)

QC001002-3,Rules of procedure-Part 3: Approval procedures

ISO 1000:1992,SI units and recommendations for the use their multiples and of certain other units.

About SPS

Supreme Power Solutions Co., Ltd. (SPS) is a leading manufacturer of ultracapacitors, as well as a provider of ultracapacitor energy storage systems and technological solutions. Our products have wide industry applications, such as new energy vehicles, wind turbines pitchcontrol systems, trams and subways, smart grid, micro grid, heavy duty machineries, intelligent instrument, etc. We support more than 200 customers, and our products are exported to 26 countries and territories.

More information:http://www.spscap.com

Related Post